Mountain Lakes, NJ

Water service line

Water Leak repair

Drain repair

Replace the water heater and sump pump on residential property in Mountain Lakes

Repairing main sewage line going to street

Commercial plumbing at gym

We are re-piping an entire large residential house with new waterlines and sewage lines going all the way to the street I will also be installing a three stage whole house filtration system and installing all new plumbing fixtures inside

Replaced water heater sump pump cleared blocked mainline drain with snake the camera inspection of sewer and installed three stage whole house water filtration system

I meticulously replaced the entire sewage main system, starting from the basement and extending to the street. This involved removing the old pipes and installing new, high-quality materials to ensure durability and efficiency. I carefully excavated the ground to access the pipes, ensuring minimal disruption to the surrounding area. Each section was inspected for damage, and necessary repairs were made to prevent future issues. The new pipes were securely fitted and tested for leaks, guaranteeing a reliable system. The project was completed with attention to detail, ensuring a safe and functional sewage system.

Commercial building plumbing repair

Upon inspection, the existing P-trap under the kitchen sink was found to be leaking due to corrosion on the rubber gaskets and significant deterioration of the P-trap itself. To address this issue, I first carefully removed the old P-trap, ensuring no water was left in the system. Next, I installed a new P-trap, paying close attention to proper alignment and secure connections. I replaced the rubber gaskets with high-quality, corrosion-resistant materials to prevent future leaks. After confirming that all connections were tight and secure, I tested the system to ensure there were no leaks. The new P-trap is now functioning correctly, providing a reliable solution to the customer's problem.

A recent project involved addressing a critical issue with a customer's sewer line. Upon inspection, a specific section of the line was found to have a significant blockage. Using advanced diagnostic tools, the exact location of the problem was identified. The repair process began with carefully excavating the affected area to access the damaged section of the sewer line. After removing the compromised part, a new segment was seamlessly installed to ensure a perfect fit and optimal functionality. The area was then backfilled and compacted to maintain ground stability. Post-repair, a thorough inspection was conducted to confirm the integrity and efficiency of the newly installed section. The customer was informed of the successful repair and advised on maintenance practices to prevent future issues.

Sump pump replacement, water heater replacement boiler replacement, Drainage, cleaning and repair broken pipe repair and toilet replacement

A new boiler was installed, complete with a state-of-the-art water heater and filtration system. The project began with a thorough assessment of the existing plumbing infrastructure to ensure compatibility with the new equipment. The old boiler was carefully removed, and the new unit was installed, including precise piping and connections. The water heater was integrated to provide efficient and reliable hot water supply. A high-efficiency filtration system was added to ensure clean and safe water throughout the system. All components were tested for optimal performance, and the system was inspected to confirm compliance with safety standards. The job was completed with attention to detail, ensuring a seamless transition to the new system.

Successfully completed a comprehensive sewer line repiping project. The old, deteriorating pipes were carefully removed and replaced with high-quality, durable materials. This involved precise excavation and installation to ensure a seamless transition. Advanced techniques were used to minimize disruption and maintain the integrity of the surrounding landscape. The new system was thoroughly inspected for leaks and functionality, guaranteeing optimal performance. The project was executed with attention to detail and a commitment to quality, resulting in a reliable and long-lasting solution.

Water heater replacement, sump pump replacement and upgrade, angle stop valve replacement for toilet and kitchen faucet, water softener and 3 stage whole house water filtration installed

A main stack replacement was successfully completed for a customer. The existing stack had become back pitched and deteriorated, necessitating immediate attention. The process began with carefully excavating the floor to expose the stack. Following the stack for approximately 60 feet, we identified the extent of the damage. The deteriorated section was then removed and replaced with a new stack. This involved precise measurements and careful installation to ensure the new stack was securely in place and functioning correctly. The floor was restored, and the area was cleaned up, leaving the customer with a reliable and safe plumbing system.

replace water heater and sump pump

Replaced water heater

I began by carefully removing the old kitchen sink, ensuring no damage was done to the surrounding cabinetry or plumbing. After disconnecting the pipes and drain, I installed a new, high-quality sink, ensuring a perfect fit and secure connections. Next, I moved on to the water heater, starting with the draining of the existing unit. I then removed the old water heater and installed a new, energy-efficient model, making sure all connections were secure and leak-free. I tested both the sink and water heater to confirm everything was functioning correctly. The job was completed with attention to detail, ensuring a seamless transition and satisfaction with the new installations.

I recently completed a plumbing job that involved installing a Rheem gas water heater, replacing a PRV, installing a thermal expansion tank, sediment trap, and performing maintenance on a water softener. The job required careful planning and execution to ensure that the system was installed correctly and efficiently. To begin, I removed the old water heater and PRV and installed the new Rheem gas water heater. I also installed a thermal expansion tank to prevent pressure buildup and a sediment trap to remove sediment from the water. Finally, I performed maintenance on the water softener, including replacing the resin and cleaning the tank. The job required careful attention to detail and a strong understanding of plumbing systems. I worked closely with the homeowner to ensure that the job was completed to their satisfaction and that the system was operating properly. Overall, the job was a success, and the homeowner was happy with the results. I am proud of the work that I did and l

I am a skilled professional that works for a Poseidon

I was called to a home to repair a leaking hose spigot. Upon arrival, I noticed that the valve was deteriorating, leading me to believe that the shut-off valve was not properly holding. I replaced the hose spigot and the shut-off valve in the basement. While

I was called to a home to replace a toilet, shower head, and valve. The toilet was removed and replaced entirely, the shower head was replaced, and the valve was replaced. The wax ring and flange were also replaced.

I was called to a home in the suburbs to fix a leak in the kitchen. Upon arrival, I noticed a leak coming from the bathroom above. I opened the sheet rock below to see the active water dripping. I removed the toilet to reveal water damage. I fixed the toilet flange and reinstalled the toilet.