Franklin Lakes, NJ

Successfully completed a comprehensive home service project, starting with the replacement of a damaged sewer line. This involved careful excavation to access the existing line, followed by precise removal and installation of a new, high-quality sewer line to ensure efficient waste management. Additionally, the old water heater was replaced with a modern, energy-efficient model. This task required careful disconnection of the old unit, installation of the new heater, and thorough testing to confirm optimal performance. The project was executed with attention to detail, ensuring the home's plumbing and heating systems were restored to peak condition.

I began by assessing the existing plumbing setup to determine the best location for the new 50-gallon water heater. After ensuring the area was clear and safe, I carefully removed the old unit, if present, and prepared the space for the new installation. I then positioned the new water heater, ensuring it was level and securely anchored. I connected the necessary gas or electric lines, depending on the type of heater, and attached the cold and hot water supply lines. I tested all connections for leaks and ensured everything was functioning correctly. Finally, I filled the tank with water and set the thermostat to the desired temperature, conducting a final check to confirm the water heater was operating efficiently and safely.

A water heater and ejector pump were both in dire need of replacement. I began by turning off the water supply and electricity to ensure safety. The old water heater was carefully removed, and the new one was installed, ensuring all connections were secure and leak-proof. Next, the old ejector pump was taken out, and the new one was installed, making sure it was properly aligned and connected to the drainage system. After installation, I tested both units to confirm they were functioning correctly. The water heater was filled with water and heated to the desired temperature, and the ejector pump was tested to ensure it was effectively removing waste. Both systems were thoroughly inspected for any leaks or issues before the job was completed.

Broken pipe repair

A new bathroom and high-end luxury kitchen were installed, transforming the space with modern elegance. The bathroom featured a custom walk-in shower with rainfall and handheld showerheads, a heated towel rack, and a dual-flush toilet for efficiency. The kitchen boasted quart

Prepared frozen pipe damage

A washing machine valve and water heater were successfully replaced. The old washing machine valve was carefully removed and replaced with a new one, ensuring a secure and leak-free connection. The existing water heater was then safely disconnected and removed, followed by the installation of a new, energy-efficient model. Proper connections and safety checks were performed to guarantee optimal performance and reliability. The job was completed with attention to detail, ensuring the appliances functioned correctly and efficiently.

Frozen pipe repair

Replaced section of frozen pipe to washer box

I carefully assessed the existing kitchen drain system, identifying the need for replacement due to wear and corrosion. I began by shutting off the water supply and removing the old drain assembly, ensuring no water was wasted. Next, I installed a new, high-quality drain, paying close attention to proper alignment and secure connections. I tested the new drain to ensure it functioned correctly and was free of leaks. Finally, I cleaned up the work area, leaving everything neat and tidy. The kitchen now boasts a reliable and efficient drainage system.

The job involved extensive troubleshooting to locate and fix a concealed leak. Drywall was cut and removed to access hidden plumbing, including behind the refrigerator to inspect the icemaker valve and piping. A failed connection at the angle stop valve supplying the garage slop sink was repaired. Two new supply lines were installed due to severe corrosion. System integrity was tested and confirmed. A new pressure regulating valve with a gauge was installed, and household water pressure was set to 60 PSI. Boiler maintenance was completed, and its operation verified. Photos of affected areas and repairs were taken and uploaded. Drywall cutting was necessary for proper diagnosis and repair. Repairs addressed only the identified failure. Recommendations for future preventative measures were provided but not included in the service.

A recent project involved enhancing the bathroom drainage system. The task began with a thorough assessment of the existing setup to identify areas needing improvement. We then proceeded to install new drainage pipes, ensuring optimal water flow and preventing future blockages. Additionally, we replaced ou

Tankless water heater flush

A significant issue was identified with the sewage drain line, causing leaks and backups into fixtures. To address this, I meticulously assessed the affected area, measuring a total of 90 feet of the drain line that required replacement. The old, damaged section was carefully excavated and removed. Precision was key in ensuring a seamless fit for the new drain line. Each connection was securely sealed to prevent future leaks. The site was cleaned, and the integrity of the new installation was verified through a thorough inspection. This comprehensive solution effectively resolved the problem, ensuring the system operates efficiently and reliably.

Completed a comprehensive plumbing overhaul, starting with the replacement of the sewer line to ensure efficient waste removal and prevent future blockages. Next, installed a new water heater, enhancing hot water availability and energy efficiency. Finally, replaced an outdated toilet with a modern, low-flow model, improving water conservation and comfort. Each task was executed with precision, ensuring all systems functioned optimally and met safety standards. The project was completed to the highest standards, providing lasting improvements and peace of mind.

I began by carefully excavating the ground to expose the 4-inch sewer line. Using precise measurements, I marked the exact loc

Upon arrival, the customer reported a complete lack of hot water. Upon inspec

A water heater was replaced, ensuring efficient and reliable hot water supply. The old unit was carefully removed and disposed of, and a new, high-efficiency model was installed. This involved connecting the new heater to the existing plumbing, electrical, and gas lines, followed by thorough testing to confirm proper operation. Additionally, a sewer line was snaked to address a blockage. Using specialized equipment, the line was cleared of debris, restoring smooth drainage. This process involved inserting a flexible cable into the pipe and maneuvering it through the blockage to remove any obstructions. The line was then inspected to ensure it was clear and functioning correctly. Both tasks were completed with precision and care, enhancing the property's plumbing system.

A new ADA-compliant bathroom was installed, ensuring accessibility for all users. The project involved replacing outdated fixtures with modern, compliant ones, including a roll-in

Installing new ejector pump for basement bathroom

Completed a comprehensive bathroom remodel, including the installation of new fixtures, vanity, and shower. The project involved meticulous planning and execution to ensure a seamless transition. A new water heater was installed, enhancing efficiency and reliability. Attention to detail was paramount, ensuring all plumbing connections were secure and leak-free. The result was a modern, functional, and aesthetically pleasing bathroom. The entire process was handled with precision, from initial assessment to final inspection.

New water heater, and shower diverter

Installing a new 75 gallon water heater along with a new shower diverter and doing a Hydro jetting of a drainage line

Replaced water heater and installed filtration system in edgewater

Removed old house trap and cleared main drain